Can you scrap metal fence?
Non-ferrous metals, like steel, brass, aluminum, bronze, and copper, are the metal types accepted by most scrap yards these days. Hence, chain link fences can be scrapped as they contain steel.
What can I do with an old metal fence?
Donations
- calling the local animal shelter to see if the fence is needed for animal cages or enclosures.
- donating it to a building coalition that can use it to fence low-income houses.
- giving the fence to a community garden, where it can be used as plant trellises or fenced plots.
- animal crisis centers.
Can you scrap welded wire fence?
Fencing wire can be recycled at your nearest scrap yard. Use a magnet to divide it into ferrous metals (iron and steel), and non-ferrous metals (copper, aluminum, brass, bronze and stainless steel), and you can recycle both. Many scrap yards say if your fencing is over 50% iron they’ll take it.
Is it hard to remove a metal fence?
Unless welded to the posts, removing it should be easier enough, typically needing you to lose the nuts and bolts holding the top rail to the posts. If the top rail is too secured to the posts or even welded together, you may need to use a more robust method such as a reciprocating saw, hacksaw, or hand grinder.
How do you remove a metal fence?
If you don’t plan to install another fence or dig the ground where the fence was located, you can simply cut off the posts just below ground level using a reciprocating saw with a metal-cutting blade. Offer the used chain link fencing to a neighbor who can make use of the fencing so you can avoid disposal costs.
What kind of metal is barbed wire?
steel
Barbed wire for agriculture use is typically double-strand 121⁄2-gauge, zinc-coated (galvanized) steel and comes in rolls of 400 m (1,320 ft) length. Barbed wire is usually placed on the inner (pasture) side of the posts.
What do you do with old barbed wires?
The safest way to remove barbed-wire fencing is to cut the wires into short, manageable pieces that can be easily carried away; this is a much better approach than trying to simply remove the wire from the posts, which results in long strands of wire that are nearly impossible to safely maneuver.
How do you remove a metal fence post from the ground without digging?
Okay so what you're going to want to do is take your strap or rope or whatever I just happen to be using a load strap from my truck and days what I do is I just make like a loop.
How do you remove a metal fence post spike?
Quote from Youtube:
Just take a little bit into the ground first and get it underneath this collar right here. Because. If you try and pull it right straight up it won't come you have to actually bend.
How do you remove a metal fence post from a concrete slab?
If your metal posts have been set in buried concrete, it’s best to pull the concrete out with the each post, and with mechanical help, you can avoid excessive digging. Drill a 1/2-inch hole through each post — about 4 inches above the ground — and insert a length of 3/8-inch re-bar to provide a grip.
How do you remove steel from concrete?
Quote from Youtube:
So you're gonna cut through the steel with the steel. Wheels. Then you're gonna cut through the masonry. After you cut through and drop it you're gonna have to grind off all the rest to get it.
How do you remove concrete from metal poles?
You’d probably need a decent piece of steel. Put a piece of angle iron on the floor jack pad and it should split/destroy the concrete. You could also use a standard hydraulic jack (they are very cheap, 20 tons or more for little $) if you can find a place to brace the jack and concrete you’re working on.
How do you remove metal T post?
Quote from Youtube:
Piece in the ground you're actually trying to dig a new hole. And. If you ever try to do this you'll notice that the post is going to kind of bend a little bit so you're actually bending the metal.
How do you get a metal stake out of the ground?
Quote from Youtube:
Take one of the pieces of pipe. And stick it through the loop that you just made in the chain. Place the pipe up against the fulcrum. And apply downward pressure as close as you can get to the end.
How do you get a metal pole out of the ground?
Quote from Youtube:
Ah but you have to do with that chain wrap it around the post the grips the clothes.
How do you remove a fence post from the ground?
Quote from Youtube:
Use a digging bar if you have hard-packed or rocky. Soil. Then wrap the chain around the concrete. And use the slip hook to latch the chain to itself pull the chain tight.
Can you reuse fence posts with concrete?
Things You’ll Need
Posts with concrete at the base are the most difficult to remove and reuse because the concrete base is larger than the post, which makes pulling it up through the ground much harder.
How do you remove a fence post with a post driver?
Quote from Youtube:
And then pull back this way with it. And little by little. And kind of ratchet your way out until you get your t-posts. All the way out. So hope that helps you.
How do you get rid of rotted fence post below ground?
Quote from Youtube:
Within the top two inches of the fence post in the ground. So above ground two inches below ground two inches that part of the post.
Why do fence posts rot?
Wood fence posts will rot due to prolonged exposure to moisture in the soil.
How do you fix a rotten fence post?
Quote from Youtube:
We're basically going to hammer it in. So the trick here is to get the easy manner wedged in between the concrete and the fence post.
How do you replace a rotten fence post?
Quote from Youtube:
By cutting the post above. And below the rail we're gonna release the rail. So they can swing out and then we can work on the post. Now we'll just bang out the pieces of the post with a hammer.
How can you tell if a fence post is rotten?
Here are the tell-tale signs it’s time to replace your fence rather than try to repair it once again:
- Rotting. One rotten board is one thing, but if there’s generalized rotting in your fence, it may be time to replace it. …
- Leaning. …
- Split and Missing Boards. …
- Loose and Missing Fasteners. …
- Repairs Are Too Costly.
How deep should a post be for a fence?
Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).